MB4012D FOUR-SIDE MOULDER 　 Synopses Machine process Lumber is machined by cutters on all four sides while passing through the machine. Four profiled cutters are to be required for four-side mouldings. workpiece guidance Lumber is guided to feed by the worktable surface and fences which are deemed as two fixed reference surfaces for all machine settings. The infeed and outfeed worktables can vertically be adjusted for cutting capacities of bottom cutters. Cutterblocks The ist bottom cutterblock and a lateral cutterblock are used for planing two datum surfaces of workpieces and the others for moulding the respective surfaces as required. Cutterblocks can all be adjusted axially & vertically and their revolution ways are related to the infeed direction. Infeed Lumber is driven to feed into the machine by feed rollers on cross frame component which is set in position as per the thickness of finished products. The cutting capacity between finished products and semifinished products are to be adjusted electrically. Intended uses of machine The machine is designed for four-side planing & moulding lumber and wood substitute materials as technical data. Any other uses will go beyond the design purposes. Typical products are the decorating wooden strips for rooms & funiture and the wooden components of doors & windows. Max.moulding width 125mm Min.moulding width 25mm Max.moulding thickness 80mm Min.moulding thickness 10mm Length of front worktable 1475mm Max.setting of movement of front worktable 5mm Max.setting movement of right fence on front worktable 10mm Feed speeds 5-20mm/min Diameter of mfeed rollers 140mm Speed of cutterblocks 6000r/min Axial adjustment of horizontal cutterblocks 30mm Axial adjustment of vertical cutterblocks 20mm motor powers for infeed 2.2kw for cross frame lifting 0.37kw for 1st bottom horizontal cutter 2.2kw for left & right vertical cutters 7.5kw for 1st top horizontal cutter 3.0kw for 2nd top horizontal cutter 3.0kw for 2nd bottom horizontal cutter 2.2kw total power 20.47kw Compressed air consumption 0.1m3/h Diameter of dust ventsl 20mm Pressure in pneumatic system 8bar Overall dimensions(L×W×H) 349×144×125cm Weight 2003kg MX3508B FINGER JOINTING SHAPE MACHINE 　 　The machine is improved on design version an equipped with pneumatic clamp units and the handfeed performance for work. It is taken as the major machine to end-cut & tenon wooden workpieces for next gluing & finger assembling processes in wood-working & furniture industries, room-decoration and building industries and so on. Max.width of moulding 80mm Min.width of moulding 400mm Max.thickness of moulding Φ300mm Min.thickness of moulding 2840r/min Min.length of moulding one workpiece Φ160mm Max.adjustment of front worktable 4400r/min Max.adjustment of rear worktable Y90L-2，2.2kw Max.adjustment of front guide fence Y132S2-2，7.5kw Diameter of sawblade 6bar Diameter of feed rollers 182×117×122cm Feed speed 802/1000kg MJ143A MULTI BLADE CIRCULAR SAW 　 　The machine is a woodworking gang rip saw with an automatic feed caterpillar unit for rip-sawing wooden boards and squares as well as partical boards in width suitably in vehicle productions, furiture productions, core-board productions, furniture and flooring parquet productions. Characteristics The machine framework has enough rigidity and precision to make sure to process wooden workpieces in high accuracy. The machine has enough power, large range of feed speeds and efficient production with multiple rip sawblade unit. The machine is simple in operation and handy to operate. The start buttons, stop buttons for sawing & caterpillar feed unit and shifting buttons for speeds are all set up on the front of machine in infeed direction with obvious marks. The caterpillar feed unit is driven via gear-shifting device for feeding by an AC motor and it is reliable in shifting operation and handy to be adjusted and manitained. The feeding roller unit is fitted up with a four-link swing mechanism to meet the operation requirements of various thickness of workpieces. The saw spindle component is set up with the height adjustment unit to make it be adjusted to the cutting-off position when the diameter of sawblades are changed. The machine is equipped with reliable safety units. Three rows of anti-backing units are installed in the infeed and to prevent workpieces from being backed during operation for the safety of operator. The protecting fence is equipped on the side of machine for the safety of operator at lateral working. There are electric locks in the machine for the safety of operators when sawblades are to be exchanged. 　The feed motion is performed by the caterpillar drive. The position of caterpillar treads under the sawblades is 2-3MM lower than the working surface and the bottom cutting line of sawblades is set to be also little lower than the working surface in position in order to cut off workpieces and to avoid the sawblades to touch the surface of catepillar treads. Besides the sawblades can also be adjusted axially for use. Diameter of sawblades 350mm Max.thickness of workpieces 110mm Min.thickness of workpieces 10mm Min.length of workpieces 750mm Power of sawing motor 37kw Revolution speed of sawing motor 2950rpm Model of motor Y200L2-2 Speed of sawing spindle 2950rpm Width of caterpillar treads 300mm Feed speed of caterpillar treads 8-24m/min Power of feed motor 1.5kw Overall dimensions(L×W×H) 2315×1480×1455mm Weight 2011kg Case dimensions 2080×1840×1800mm Gross Weight 2205kg BSG2312A THREE-HEAD SANDER 　 　The machine is used mainly for sanding plywood, chipboards, core-boards, man-made boards and furniture boards. It is good in framework rigidity, smooth in operation, efficient in operation and nice in sanded finishness. 　The sanding rollers have been strictly heat-treated and run-balanced precisely to ensure durable operation. The surface on the rollers are processed with big helicoid grooves to enhance the driving force of sanding rollers to the abrasive belts and the machine has high productive efficiency as there still are the big sanding power per unit surface (0.3kw/cm) when workpieces are sanded in max. width. 　The bottom support rolllers for workpieces are suported by six sets of special-design cylinders, so workpieces are sanded in operation basically under the constant back pressure, It is very easy for you to adjust the back pressure until you are satisfied with the sanding results according to the requirements for workpieces. 　The feed unit in the machine is driven by a indent chain speed variator which has large of variable speeds from 16 M/Min to 70 M/Min (6-35 M/Min) for yourchoices with the help of shifting handwheel. The speed variator 45:1x1/10.2 is used for sanding plywood and the variator 6:1x1/24 for sanding chipboards. Max.width of workpieces 1270mm Max.thickness of workpieces 120mm Min.length of workpeces 750mm Sizes of abrasive belt(W×L) 1310×2615(mm) Speeds of abrasive belt 1st sanding roller 24.6m/s 2nd sanding roller 22.1m/s 3rd sanding roller 16.7m/s Feed speed 16-70m/min (6-35M/Min of CHIP BOARDS) Power of motors for 1st sanding motor Y200L-2 37KW for 2nd sanding motor Y200L-4 30KW for 3rd sanding motor Y180L-4 22KW for dust-brush motor Y90S-6 0.75KW for feed motor Y112M-4B35 4KW for worktable lifting motor XMD0.75-2-1 Compressed air consumption 0.8m3/min(6kgf/cm2) Overall dimensians(L×W×H) 3495×3130×2220(mm) Contact information: Ms.Ba Qian ( Project Manager ) Add.: No. 60 Changxing Street Tiedong District         Anshan, Liaoning, China Tel : 86-412-5843781 / 5845861 / 5815320 / 5845160 Fax  : 86-412-5845853 E-mail : amec@lnmec.com Post Code : 114004